Complex systems require the most advanced drive. The CFW11 covers power levels from 1.1 to 630 kW (1.5 to 900 HP).
Great for Pumping systems using pre-built highly configurable “Pump Genius” PLC Software.
With high technology for control of three-phase induction motors and permanent magnets synchronous motors – Magnet, the CFW11 Series achieves the performance increase for the most complex drive systems. Design exclusive for industrial or professional use, the CFW11 presents many innovations adding significant benefits to customers, a lot for its simplicity of installation and operation, based in the Plug-and-Play philosophy also allowing simple and quick installation of its accessories.
1.1 to 2.2 kW (1.5 to 3 HP) 200-240 V – Single-phase
1.1 to 55 kW (1.5 to 75 HP) 200-240 V – Three-phase
1.5 to 415 kW (2 to 600 HP) 380-480 V – Three-phase
1.5 to 630 kW (2 to 900 HP) 500-600 V – Three-phase
1.5 to 630 kW (3 to 900 HP) 660-690 V – Three-phase
1.1 to 2.2 kW (1.5 to 3 HP) 200-240 V – Single Phase
1.1 to 55 kW (1.5 to 75 HP) 200-240 V – Three Phase
1.5 to 415 kW (2 to 600 HP) 380-480 V – Three Phase
1.5 to 630 kW (2 to 900 HP) 500-600 V – Three Phase
1.5 to 630 kW (3 to 900 HP) 660-690 V – Three Phase
Vectrue Technology™ allows WEG inverters to combine V/F, Sensorless Vector, VVW, and vector (with encoder) control techniques – all in one product. Aimed at increasing productivity, offers efficiency ratings greater than 97%, as well as innovations designed to improve motor control and operational functions.
For high inertia loads and short deceleration times is required, a large amount of energy is returned from the motor to the VSD. As an alternative to the use of braking resistors, CFW11 features a special braking method in vector control mode.
Optimal Flux ®
In applications with constant torque loads at low speeds, it eliminates the need for independent ventilation or motor over sizing, saving space and cost plus improve the performance of the package.
Wmagnet Drive System®
Frequency Inverter controlling permanent magnet motors. The WMagnet System (CFW11 + WMagnet motor) has the highest efficiency levels in the market.
Features and Benefits
Scalar Control (V/F), Vector Control (VVW), Open loop Vector Sensorless and Closed Loop with Encoder
Senusoidal PWM modulation – Space Vector Modulation
Overload capacity: ND with 110% current or HD with 150% current in 60 sec.
RFI Filter built-in (optional)
DC link Reactor built-in
Safety stop board (EN 954-1/ ISO 13849-1 compliant)
Ambient temperature -10 ºC up to 50 ºC (14 °F up to 122 °F)
All the electronic boards are con-formally coated classified as 3C2 according to IEC 60721-3-3 standard
Protection Degree IP20 and NEMA 1 (with accessory) or IP54 (optional)
SoftPLC function built-in
Local graphic HMI with real-time clock built-in
Plug-in modules: I/Os, temperature sensor, encoder and communication network
24 V cd power supply board for control feeding
PLC built-in – PLC11-01 and PLC11-02 (accessory)
Flash memory module: In few seconds, it is possible to download the programming from a CFW11 to others without powering them up
Communication protocols: Modbus RTU (RS-232 and RS-485), CANopen, DeviceNet, Profibus DP/DPV1, Profinet, Modbus-TCP, EtherNET/IP, EtherCAT and BACnet
WLP and SuperDrive G2 free software
Trace Function by WEG Software
Plug and Play
The philosophyPlug and Play(connect and use) enables quick and easy installation of accessories and options. It automatically recognizes and configures the accessories used, enabling easy installation and safe operation eliminating manual configuration.
Human Machine Interface
The human-machine interface (HMI) was developed for simple and fast interaction while providing excellent visibility for the user. The HMI has backlit graphic display and soft-key, greatly facilitates inverter programming and operation.
Programming software for PC (USB connection), Windows environment, for parametrization, command and monitoring of CFW-11 inverters.
Soft / PLC
Memory card built into the standard product allows user to create functions without the need to use an external PLC (SoftPLC via IEC61131-3 programming software).
WLP (WEG Ladder Programmer)
The WLP or “Weg Ladder Programmer” is a software that allows the user to program using ladder language, command and monitoring. It is a powerful 32 bits tool that grants you characteristics and functionalities to create professional applications through simple mouse clicks.
Software Superdrive G2
SuperDrive G2 is a tool for parameter setting, command and monitoring of drives. With intention to make the use of drives as easy and convenient as possible, the software provides user-friendly viewing, manipulating, and editing data with the drive. The data can also be stored and retrieved.